The Prodys Quantum range of hardware codecs is fully compatible with sip.audio. It includes OPUS, our preferred codec for interoperability.

CONFIGURATION

Video: Configure Prodys Quantum for sip.audio

1. Log in to the web interface for the device using its IP address. You can also configure from the touch screen.
2. Navigate to Menu > Conf > Audio > Encoders
   Algorithm: OPUS
3. Click 'OK'.
4. Navigate to Menu > Streaming > Protocol > Address
   STUN Server: stun.sip.audio
5. Click 'OK'.
6. Navigate to Menu > Streaming > Protocol > Server
   Register in Server: Yes
   Server IP: sip.audio
   Auth User: SIP Username (For example, enter fmstation.quantum for fmstation.quantum@sip.audio)
   User Name: Same as Auth User
   Auth Pass: SIP Username's Password
   Enable Outbound Proxy Server: Yes
   Server: proxy.sip.audio
7. Click 'OK'.
8. Navigate to Menu > System > Advanced
   SIP: Enable Infinite Redial On connection Lost 0
9. On the home screen, check the SIP Status. It should show '200', if successfully registered to the SIP server.

CORRECTIONS?

Help to keep the Knowledge Base accurate for the benefit of the worldwide community, by contacting In:Quality with details of errors, omissions or updates. Raise a Ticket.