SUMMARY

LUCI LIVE is fully compatible with sip.audio. It includes OPUS, our preferred codec for interoperability. It allows the use of a microphone connected to the lightning port on iOS devices.

Video: Connect from iPhone to ipDTL or SIP device using sip.audio

CONFIGURATION

Video: Tutorial: Configure LuciLive for sip.audio

1. Open the LUCI app and create a station for each required destination with the following settings:
   Protocol: SIP or N/ACIP
   Destination: destination.account@proxy.sip.audio
   STUN: stun.sip.audio
   User: SIP Account Username (For example, enter fmstation.luci1 for fmstation.luci1@sip.audio)
   Password: SIP Account Password
   Select Follow Caller, not Force Format.
   Format: Opus (Must enable Stereo for 'Opus Audio')
   Samplerate: 48000
2. Choose a bitrate and select stereo if required. We recommend no more than 64kbit/s mono on mobile networks.
3. Remove any pre-configured port number.
4. After you have saved and selected the station configuration, return to the main screen and activate the antenna symbol. Once it has turned red, you are registered to the sip.audio server.
5. Click the microphone symbol to initiate a call to station's configured SIP account, or to answer an incoming call.

LUCI LITE

LUCI Live Lite DOES NOT include OPUS, our preferred codec for interoperability. G722 is recommended for interoperability.

CONFIGURATION

1. Open the LUCI app and select the Settings gear icon.
2. Select 'SIP defaults'. Add the following settings.
   Username: SIP Account Username (For example, enter fmstation.luci1 for fmstation.luci1@sip.audio)
   Password: SIP Account Password
   Sip server: proxy.sip.audio
3. Remove any pre-configured port number.
4. Press 'Done'.
5. Select 'Stations'. Press the + icon.
6. Select 'Custom station'.
7. Create a Station for each required destination with the following settings:
   Protocol: SIP
   Destination: destination.account@proxy.sip.audio
   Stun: stun.sip.audio
   Username: Enable Default User
   Codec: G722
8. Remove any pre-configured port number.
9. Press 'Done'.
10. On the main screen, choose your desired Station to connect with. Click the microphone symbol to initiate a call.

CORRECTIONS?

Help to keep the Knowledge Base accurate for the benefit of the worldwide community by contacting In:Quality with details of errors, omissions or updates. Raise a Ticket.